Hello There, Guest! Register

[Visualization] Cozmo's Guide on Creating and Building a Tulpa's Body
Hornets Offline
DISCO
Registered

Posts: 158
Threads: 14
Joined: Apr 2013
#1
 
Default  Cozmo's Guide on Creating and Building a Tulpa's Body
Hi! I'm Cozmo. In this guide, I'll detail how to visualize and form a tulpa's body the way I did. If you are more artistic, this guide should help.

So, first thing's first -- you will need:
  1. The ability to see your Wonderland well
  2. Good visualization skills
You do not need to have a vocal tulpa to do this.
Also, your tulpa that you are forming does not need to be sentient. The tulpa I formed using this method was not sentient!
[Cozmo: It is much easier if they are sentient though, so they can tell you what they want on their body.]

First off, delve into the world of your wonderland. Make sure everything can be seen clearly with your mind's eye. Find a flat place in your wonderland, and impose something alike to a "pose stand".
This "pose stand" can be anything from a simple block of wood to an advanced Second Life-esque pose stand that you might see.

First off, we'll start with the head. First, form a white sphere above the pose stand, the height depends on how tall your tulpa will be. Now, imagine what type of aspects the sphere might have -- shiny, matte, dull? Try to focus on these things. If you can do this, you should be able to complete the next few steps.

1. Begin to form your tulpa's head off of the previously imposed sphere. If it's some form of animal, form it's snout. Imagine yourself kneading and stretching the shape like clay. Pinch the little details into the head. Shape the face out exactly how you want it to be, or as your tulpa dictates.

2. Begin to "texture" your tulpa's head. Imagine what colour the head might be, where the colours are darker, or where the colours change. Then, apply a texture on top of the colour. If your tulpa has fur, apply a fur-like texture to the head. Imagine yourself brushing the fur into the head with a comb.
Imagine yourself zooming in on your tulpa, adding in the fine details like the tear ducts in the eyes or the whiskers on their face.

3. Now we'll look at the sense aspects of the head. Imagine what the head would feel like if you were to rub your hand against it. Would it feel light and fluffy, firm, soft? If they have fur on their cheeks or hair, imagine you running your fingers through that. Imagine how their head feels temperature-wise when you put your hand on their forehead.
You can also imagine what they smell like at this point too.

4. After you've formed their head, they should be a literal floating head over the pose stand. Imagine what the cast shadow looks like.
At this point, you can begin forming the body too.

5. To form the body, do all the above steps with each body part. Add a neck, then a chest, then two arms, etc. etc. It should get easier as you go. When you get to the hands, imagine you are intricately sculpting a real hand out of clay, putting in fine details like wrinkles on the hand or the lines on the palm.

6. If the tulpa isn't sentient yet, touch the body, and imagine it falling to the ground. Imagine how the body would fall. Imagine yourself picking up the body and posing it on the stand. Try posing it in various positions for fun!
(If your tulpa is sentient, skip this step)

7. You're done!

If you have questions, feel free to ask!
(I'm going to add more later).
06-14-2013, 02:35 AM
Find Reply
RedDeadElite Offline
Member
Registered

Posts: 5
Threads: 0
Joined: May 2013
#2
 
Default  RE: Cozmo's Guide on Creating and Building a Tulpa's Body
(06-14-2013, 02:35 AM)cozmopolitan Wrote: 6. If the tulpa isn't sentient yet, touch the body, and imagine it falling to the ground. Imagine how the body would fall. Imagine yourself picking up the body and posing it on the stand. Try posing it in various positions for fun!
(If your tulpa is sentient, skip this step)

Kinky, and really helpful guide. Thanks.
07-04-2013, 04:54 AM
Find Reply
lapisxilazuli Offline
Member
Registered

Posts: 18
Threads: 8
Joined: Jun 2013
#3
 
RE: Cozmo's Guide on Creating and Building a Tulpa's Body
This is really helpful! Thanks a bunch.

Tulpa: Kellen
Age: 6-18-13
Form: 16 year old Male-human
Working on: Vocality
07-10-2013, 08:07 PM
Find Reply
NotAnonymous Offline
Member
Registered

Posts: 220
Threads: 0
Joined: May 2012
#4
 
RE: Cozmo's Guide on Creating and Building a Tulpa's Body
Approved. [Visualization]

It would help if this guide was a bit more general - the examples are a bit too specific to one kind of form.
11-16-2013, 08:22 AM
Find Reply
Linkzelda Offline
>MFW Image Streaming
Registered

Posts: 2,010
Threads: 31
Joined: Oct 2012
All Accounts Posts: 2,068
#5
 
RE: Cozmo's Guide on Creating and Building a Tulpa's Body
Pretty simple guide, approved [Visualization]. There’s a nice application with the “pose stand,” and as long as newcomers don’t end up having some existential questioning over how their tulpa originated, this guide doesn’t seem like it would be a detriment towards creation in general.

Approved.


12-06-2013, 04:40 AM
Find Reply
Sands Offline
And Roswell
Registered

Posts: 2,117
Threads: 10
Joined: Jun 2012
#6
 
RE: Cozmo's Guide on Creating and Building a Tulpa's Body
Simple guide, though I have no idea how this Second Life stand is supposed to look so it left me wondering.

It's a good idea to remind people who are good with their hands to actually use them in their imagination. This kind of clay modeling is an excellent idea, especially to those who are familiar or hell, even good with the medium. Feeling the details of the form is what helped myself to actually see the form a lot, but I'm a very touch-oriented person. In a way I feel like this is more for the touch-people like myself, but because 3D sculpting and modeling is a thing, people who like to do that but can't handle clay might also feel familiar with this. Though maybe with less touching at start.

But yeah, I approve.

The THE SUBCONCIOUS ochinchin occultists frt.sys (except Roswell because he doesn't want to be a part of it)
12-23-2013, 03:46 PM
Find Reply
waffles Offline
no capital
Registered

Posts: 1,174
Threads: 24
Joined: Sep 2012
#7
 
RE: Cozmo's Guide on Creating and Building a Tulpa's Body
The pose stand stuff is just like a big disc on the floor that a person stands on or hovers over in a particular pose.

I approve, yeah, good stuff.
12-23-2013, 05:13 PM
Find Reply
Linkzelda Offline
>MFW Image Streaming
Registered

Posts: 2,010
Threads: 31
Joined: Oct 2012
All Accounts Posts: 2,068
#8
 
RE: Cozmo's Guide on Creating and Building a Tulpa's Body
4/11 GAT members have approved of this for Guides Submission, and 3 more are needed before the deadline (12-30-2013) before the shift is made.


12-28-2013, 07:07 PM
Find Reply
CyberD Offline
Daniel & Noah
Registered

Posts: 330
Threads: 3
Joined: Oct 2012
#9
 
RE: Cozmo's Guide on Creating and Building a Tulpa's Body
It's all been covered by the other GAT members. I'll approve of it.
12-28-2013, 08:56 PM
Find Reply
schlondark Offline
Member
Registered

Posts: 191
Threads: 5
Joined: Jul 2012
#10
 
RE: Cozmo's Guide on Creating and Building a Tulpa's Body
Approved.
12-28-2013, 09:24 PM
Find Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | Tulpa.Info | Return to Top | Return to Content | Mobile Version | RSS Syndication